What CNC operators do first .The first step is to operate CNC machine tools to program and process parts.. The CNC process adopts cold working skills, and the whole piece of material is carved to avoid inaccuracies caused by factors such as temperature.

​​Fill in the documents and materials of the machining center machine tools and products as required, and make production operation records and equipment maintenance records; Able to understand drawings and related technical skills documents, help analyze, deal with and solve quality problems, and propose improvement plans; The mold product is hot processed cooled demoulding, there are bubbles, and the cooling time is uncertain, which has a greater impact on the accuracy and strength of the product. For different CNC lathe robots, only need to compile different Software implementation, and hardware are almost universal.  

CNC lathe robot processing. This system was widely used before the 1970s. Then appeared a multi-coordinate CNC lathe robot to process the robot. The difference between the control and the point of the CNC lathe processing robot is: when the moving parts of the machine tool move, it can be processed along one axis (generally it can be OEM Automotive Parts Factory cut at 45°, but not linear cutting with arbitrary slope), and the auxiliary function is CNC

The position control of the lathe robot, for example, increase the spindle speed control, feed processing cycle, tool selection, and other functions. The machining of this kind of CNC lathe robot not only controls the position between two related points, but also controls the movement speed and route between the two related points.  

Contour control CNC lathe processing robot. The input, interpolation and control functions of this numerical control system are realized by integrated circuits or discrete components. The software and hardware are modularized, which improves the quality and reliability of the system. 



امتیاز بدهید :

| امتیاز : 0
موضوع : | بازدید : 301
برچسب ها : OEM Automotive Parts Factory,

تاريخ : جمعه 4 تير 1400 | 8:34 | نویسنده : axismachining |

CNC precision parts processing has an irreplaceable role in the development of new products. Workers do not need to control the whole process like ordinary lathes during processing, mainly to observe and supervise the lathe. If you want to know more about the consultation of CNC parts processing Custom Automotive Metal Dies Parts Manufacturers in Dongguan, CNC parts processing can process multiple surfaces at the same time.

The initial investment is larger than that of ordinary lathes, because the price of CNC lathes is very high, and its maintenance costs and the first preparation period for processing are long. Then you Do you know the characteristics of CNC parts processing? Compared with ordinary lathe processing, it can save a lot of procedures and save time, and the quality of parts processed by CNC is also more stable than that of ordinary lathes.

The degree of automation of CNC precision parts processing is very sufficient, which greatly reduces the manual labor intensity of workers.With the continuous changes of the times, so is our industry, and we are also constantly changing all aspects of ourselves, to make our industry so developed and so advanced.

Generally speaking, parts of different complexity can be processed through programming, while modification and update of the design only need to change the program of the lathe, which can Greatly shorten the product development cycle.dgjiaxin100. First of all, the production efficiency of CNC parts processing is higher. Dongguan CNC parts processing is one of them.



امتیاز بدهید :

| امتیاز : 0
موضوع : | بازدید : 378
برچسب ها : Custom Automotive Metal Dies Parts Manufacturers,

تاريخ : چهارشنبه 12 خرداد 1400 | 8:11 | نویسنده : axismachining |

The reasons for the stable cutting speed of the round nose cutter are explained below. , It is not easy to collapse, so the life of the tool will be better than that of the end mill. In addition, the contact area of ​​the ball knife with the workpiece is the edge of the R angle, so the knife spacing can be larger in the finishing process, and the machined surface also has an excellent effect.   

You can see that when the ball cutter is milling a 3D workpiece, the contact position of the blade and the workpiece will constantly change, so the cutting speed is always changing.1 Features of end mills When milling aWholesale OEM Automotive Parts Injection Molding Factory 2D-shaped workpiece, since the contact area with the workpiece is the outer edge and the bottom surface, it is possible to use extremely efficient numerical values ​​regardless of the distance between the tools and the depth of cut.

Generally speaking, end mills are very suitable for 2D-shaped workpieces, but when applied to 3D-shaped mold processing, they are not so suitable. Because the bottom of the round nose knife is flat, the horizontal knife spacing of the round nose knife can be larger than that of the ball knife. In traditional mold processing, end mills are also used for roughing. The cutting speed is stable at two points a and c, so this area is where the cutting edge is cutting the workpiece, and a good machining surface can be obtained. Integral tool  

However, the relative material cost of making the knife will increase, and the knife edge needs to be reground after it is wo out before it can be used again. When the material of the blade is harder than the material to be cut and the cutting speed is reached, the contact area between the material and the cutting edge will be removed.    



امتیاز بدهید :

| امتیاز : 0
موضوع : | بازدید : 430
برچسب ها : Wholesale OEM Automotive Parts Injection Molding Factory,

تاريخ : دوشنبه 27 ارديبهشت 1400 | 13:36 | نویسنده : axismachining |